Starizona

20mm adapter that connects Starizona's Filter Slider to an M42 thread. The adapter has female M42 threads on the telescope side and male Filter Sli...

This adapter will step M42 threads up to M48.  It has M42 female on the inside and M48 male on the outside.  It does not add any length to the opti...

This M42-to-M48 Step Ring features a built-in lip that acts as a mechanical backstop, preventing over-threading into larger M48 connections. Perfec...

Our M42-to-M54 Step Ring with Lip adds a stop to keep the ring from threading too far in.  Ideal for using a ZWO CAA with an SCT T-adapter, for exa...

Made of anodized aluminum.

20mm long adapter from female M48x0.75 to male M48x0.75 threads.  This can be useful to get 55mm backfocus with a ZWO cooled camera (17.5mm) and St...

Product Description This precision-machined 15 mm M48 Extension Tube is designed to provide an exact increase in optical path length for fine-tunin...

20mm adapter that connects Starizona's Original Filter Slider to an M48 thread. The adapter has female M48x0.75 threads on the telescope side and m...

Common T-rings use M42 threads and are not compatible with equipment that uses larger M48 threads.  Use this anodized aluminum T-ring to connect a ...

Made from anodized aluminum.

This adapter will step M48 threads up to M54.  It has M48 female on the inside and M54 male on the outside.  It does not add any length to the opti...

Use this adapter to attach accessories with standard M48 filter threads to a 2" focuser. The adapter has male M48 threads on one side, and a male 2...

This adapter is similar to the M54 to M48 step ring that comes with the ZWO 2" filter wheel, but it adds a thin lip to allow the ring to stop again...

M54 male to M54 male adapter.  Adds 1mm to backfocus.  Useful for attaching a ZWO 6200 camera to the ZWO 2" filter wheel without bolting the wheel ...

Ideal for using a 68mm OAG, our M68 T-adapter fits any Celestron telescope with the larger 3.29" rear cell threads.  It is compatible with all C11 ...

This 3D printed case will hold our Origin filter drawer and a mounted filter, keeping the filter clean and safe and ready to go between sessions.  ...

Have a Modular Filter Slider but need to change the attachment threads?  We got you covered.  These plates can be used on both the top and bottom o...

This double ring set offers improved stability over single camera body mounting rings for using a ZWO camera with a DSLR camera lens.  The ring set...

This double ring set offers improved stability over single camera body mounting rings for using a ZWO camera with a DSLR camera lens.  The ring set...

The Evolution Bracket tilts the hand controller at a convenient 30-degree angle, making it easy to read the LCD and use the controller even while i...

The NexStar SE Bracket tilts the hand controller at a convenient 30-degree angle, making it easy to read the LCD and use the controller even while ...

This part is used to replace the removable lip on the newer model Starizona Nexus 0.75x coma corrector, providing a male M54 x 0.75 thread for a di...

This part is used to replace the removable lip on the newer model Starizona Nexus 0.75x coma corrector, providing a male M54 x 1 thread for a direc...

This part is used to replace the removable lip on the newer model Starizona Nexus 0.75x coma corrector, providing a male M54.5 x 1 thread for a dir...

*** Currently Unavailable - Working on new regular and HD ***   With the 0.4x focal reduction factor, the field of view becomes 2.5x wider and expo...

OPEN-BOX ITEM This SCT Corrector IV is an open-box unit. Each open-box item has been inspected and verified by our engineers to be in like-new co...

3D printed from durable carbon fiber PETG, this filter drawer is compatible with the Celestron Origin smart telescope.  It works exactly like the s...

Interchangeable replacement tops for Starizona's Original Filter Slider. Not compatible with Starizona's newer Modular Filter Slider.   Top Plate T...

Use this adapter to put a 2" male nosepiece onto the original (non-modular) Starizona Filter Slider to use on anything that accepts a 2" barrel.   ...

Use this adapter to attach a ZWO PE200 pier extension to a Skywatcher EQ6 tripod.  It works with either a standard EQ6 white tripod or the black EQ...

Starizona's QuickSwitch allows the use of a ZWO EAF focus motor on an SCT while maintaining the ability to manually focus.  This makes it easy to s...

20mm adapter that connects Starizona's Filter Slider to the Stock RASA 11 adapter for ZWO Cooled cameras. Yay!

The Starizona RASA 8 Filter Holder allows you to use 2" filters with the Celestron RASA 8" telescope with cameras that are not compatible with a Fi...

The RASA 8 Filter Holder allows the use of 2" filters on Celestron's RASA 8" telescope with a camera using M54 threads and having a 17.5mm backfocu...

Purchase additional filter holders to easily use multiple filters with the Starizona Filter Slider. Holds standard 2" mounted filters with 48mm thr...

Our Red Dot Finderscope Bracket is designed for rigidity and long-term durability, with a reinforced base that resists flex under demanding use. Ma...

Preserve your night vision while stargazing with this straightforward red LED flashlight. The single-button design makes it effortless to toggle on...

By removing the original faceplate or tip-tilt adapter on the RedCat 51 you can thread this adapter directly to the scope giving you the correct th...

Use this adapter to attach accessories with standard SCT female threads (such as a focal reducer) to a 2" focuser or visual back. This adapter has ...

35.3mm T-to-T spacer (M42 female to M42 male).  This adapter takes up 35.3mm of the Starizona SCT Corrector's 90.3mm back focus. Leaving 55mm of ba...

This adapter gives your Starizona SCT Corrector v1 SCT Threads.   Thread Type: SCT Length: 9mm length

Updated, more robust design! This bracket will fit the existing finderscope mounting holes on SCT telescopes.  It fits common finderscope style fee...

This PETG 3D printed altitude knob replaces the original Sky-Watcher EQ6 altitude knob with a larger easier to grab alternative.  To install simply...

This power adapter converts the standard Sky-Watcher aviation power adapter port into the more common female 2.1 x 5.5mm female adapter.

Once installed (see instructions at bottom), the actions appear in the Actions palette in Photoshop and a selected action may be “played” by simply...

With the Apex ED reducer, an f/5.5 apo refractor becomes an incredibly fast f/3.6 astrograph. A slower f/9 telescope like an RC becomes a speedy f/...

The Starizona Balance Box is used to measure the current being drawn by a telescope mount to determine if the mount is properly balanced. With s...