Starizona

Use this adapter to connect a T-ring or T-mount camera to a 1.25" focuser. Low profile design keeps backfocus short. Threaded for standard 1.25" fi...

Use this female T-thread to male T-thread spacer to extend standard T-thread adapters by 16.5mm.

This replacement adapter came with the original Starizona RASA8 Filter Slider converting the bottom M48 to M42 and adding 1mm to the Filter Slider ...

This adapter threads into the front (telescope side) threads of the SkyWatcher EvoStar ED focal reducer, allowing the reducer to be placed directly...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It is zero profile, adding no extra height to the 1.25"...

This adapter adds 4.2mm to your Starizona Filter Slider making it 21.7mm in total length, compensating for the .7mm that a standard Filter adds to ...

M42 female to M42 male 4.5mm spacer.

This adapter enables you to mount your unmounted 50.8mm filters to 48mm threads. This mount will allow you to use unmounted 50.8mm filters with Sta...

M42 female to M42 male 5mm spacer.

7.5mm M42 to M42 spacer

Adapter for HyperStar 11 or HyperStar 9.25 and ZWO M42 Filter Drawer for ZWO Cooled Cameras

The SkyWatcher Esprit 120 and 150 require the Starizona ApexED 0.65x reducer to be placed farther back from the optical tube and when used with our...

The ApexEd Threaded Focuser Adapter works on a verity of focuser options. You can pick between M42 or M48 male camera facing threads. Each Threaded...

Our solution was to make a level that fits onto a convenient surface on the mount and converts that angled surface into a horizontal one. The AVX L...

Looking to permanently mount your AVX mount? You'll want this adapter kit to easily attach the AVX equatorial mount to a permanent pier. The top pl...

This adapter can be used as a 1.25" nosepiece for any camera that has C-mount (1") threads. The adapter has male C-threads on the camera side, and ...

Use this adapter to connect a camera with female T-threads to a device with male C-threads. Ideal for using T-thread autoguiders such as the Orion ...

This is a replacement for the secondary mirror mounting plate that is included with the HyperStar 6.

This is the top camera adapter plate for our T-Adapter with Filter Holder for large EdgeHD scopes.  The T-adapter normally comes with M42 threads, ...

This wide M48-threaded T-ring will fit Canon RF-mount mirrorless cameras.  It is a "T-minus" style ring that is only 10mm thick.  This allows it to...

12-volt DC power cord to connect Celestron Advanced Series, AVX, CPC, CGE, and NexStar telescopes to battery supply. Cigarette-lighter style plug.

Looking to permanently mount your CGEM telescope? You'll want this adapter kit to easily attach the CGEM equatorial mount to a permanent pier. The ...

Three stand-off posts keep the top plate clear of the pier itself, allowing easy mounting and adjustment of the CGX. The posts are each 1" in diame...

The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to hel...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

  The Starizona Cool Edge was named one of Sky & Telescope's Hot Products for 2012! This innovative product from Starizona is designed to...

Additional threaded 2.5-pound bottom counterweight for Starizona counterweight sets (for NexStar GPS and CPC telescopes). Necessary for heavy loads...

Note that this version of the counterweight set will not work with the CPC-1100 telescopeTo achieve true dynamic balance with a fork-mounted SCT, b...

This version of the Counterweight Set will not work with the CPC-1100. For the correct version, click here. Accurate balance is necessary for the b...

This is the top half of the Celestron 11" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Inc...

Note that this version of the counterweight set will not work with the CPC-800 telescopeTo achieve true dynamic balance with a fork-mounted SCT, bo...

This version of the Counterweight Set will not work with the CPC-800. For the correct version, click here.Accurate balance is necessary for the bes...

This is the top half of the Celestron 8" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Incl...

Note that this version of the counterweight set will not work with the CPC-925 telescopeTo achieve true dynamic balance with a fork-mounted SCT, bo...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...