In Stock

The Sky-Watcher SolarQuest solar tracking mount is lightweight and ridiculously easy to use. No need to worry about aligning your equipment the ni...

The SkyWatcher Esprit 120 and 150 require the Starizona ApexED 0.65x reducer to be placed farther back from the optical tube and when used with our...

This wide M48-threaded T-ring will fit Canon RF-mount mirrorless cameras.  It is a "T-minus" style ring that is only 10mm thick.  This allows it to...

This bracket provides a solid, easy attachment of the ZWO EAF autofocus motor to a Skywatcher Quattro Newtonian focuser.  There are two versions of...

This PETG 3D printed altitude knob replaces the original Sky-Watcher EQ6 altitude knob with a larger easier to grab alternative.  To install simply...

Use this adapter to attach accessories with standard M48 filter threads to a 2" focuser. The adapter has male M48 threads on one side, and a male 2...

The iconic 8-inch Schmidt-Cassegrain has been known for decades as Celestron’s most beloved telescope. Now beginner to intermediate astroimagers ca...

The RASA 8 Filter Holder allows the use of 2" filters on Celestron's RASA 8" telescope with a camera using M54 threads and having a 17.5mm backfocu...

T-thread adapter for autofocus Canon EOS EF cameras.

ZWO ASI220MM Mini Monochrome Camera    

This adapter will step M48 threads up to M54.  It has M48 female on the inside and M54 male on the outside.  It does not add any length to the opti...

M54 male to M54 male adapter.  Adds 1mm to backfocus.  Useful for attaching a ZWO 6200 camera to the ZWO 2" filter wheel without bolting the wheel ...

Sorbothane gasket used in HyperStar conversion kit for Celestron 11" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly so...

Looking to permanently mount your AVX mount? You'll want this adapter kit to easily attach the AVX equatorial mount to a permanent pier. The top pl...

Sorbothane gasket used in HyperStar conversion kit for Celestron 8" SCTs. Useful for retrofitting a factory-installed Fastar secondary assembly so ...

20mm long adapter from female M48x0.75 to male M48x0.75 threads.  This can be useful to get 55mm backfocus with a ZWO cooled camera (17.5mm) and St...

This is the standard stainless steel counterweight for use with HyperStar lenses on fork-mounted telescopes (also known as Alt/Az mounts).  The wei...

M42 female to M42 male 5mm spacer.

This version of the Counterweight Set will only work with the CPC-1100. For other Celestron 11" SCTs, click here. Accurate balance is necessary for...

  This 2" mounted APT-T dual band 5nm Ha & OIII filter is optimized to work with imaging systems slower than f/4. For faster optics from f/2.2 ...

Rotate your camera with ease and compose your shots with one click -ZWO CAA- ZWO CAA (Camera Angle Adjuster) is ZWO’s new camera rotator, designed ...

The only purpose of this adapter is to replace the top of an already existing standard HyperStar adapter to change its thread type.  An example of ...

Add an EAF to your Sky-Watcher HAC125 DX!  This kit includes a pulley that fits on the focus knob on the back of the HAC125 and a belt to drive it ...