In Stock

Holds standard 2" mounted filters with 48mm threads. Be sure to choose the correct version of Filter Slider you have.

Important things to know about HyperStar adapters: DSLR adapters will not work with the Filter Slider Filter Slider Adapters do not come with a St...

This 3D-printed case is made to hold the filter drawer from our Filter Slider. The drawer with filter installed fits into the case for protection a...

Performance The diagram above shows how the SCT Corrector improves the off-axis spot size on a Celestron 11" SCT. Performance is similar on other ...

* HYPERSTAR USERS: If you're ordering a Modular Filter Slider for your HyperStar you will also need to purchase a Filter Slider Adapter for your ...

Dr. David H. Levy Talks about Hyperstar How to Install Your Hyperstar HyperStar Promo Video Features The HyperStar 8 lens converts...

  Introducing 5V EAF, this electronic focuser, like its previous version, enables precise, dynamic focus control for planetary and deep-sky imaging...

The Starizona EvoFF field flattener turns the Skywatcher Evoguide 50 into a sharp, portable, wide-field imaging scope. The EvoFF has a 55mm backfoc...

The ApexEd Threaded Focuser Adapter works on a verity of focuser options. You can pick between M42 or M48 male camera facing threads. Each Threaded...

With the Apex ED reducer, an f/5.5 apo refractor becomes an incredibly fast f/3.6 astrograph. A slower f/9 telescope like an RC becomes a speedy f/...

Dr. David H. Levy Talks about Hyperstar How to Install Your Hyperstar HyperStar Promo Video M31 image taken by Jammey Church T...

HyperStar 11 photos taken by the amazing: Andreas Bringmann Dr. David H. Levy Talks about Hyperstar How to Install Your Hyperstar Hy...

The filter drawers can be pulled in and out using a small knob. This knob is required because the filter slider will be completely flush with your ...

ZWO SeeStar Manual   

The Antlia. Triband RGB Ultra Filter is designed for light pollution suppression for OSC and Mono cameras. The spectral design selected the most su...

The NexStar SE Bracket tilts the hand controller at a convenient 30-degree angle, making it easy to read the LCD and use the controller even while ...

Dr. David H. Levy Talks about Hyperstar How to Install Your Hyperstar HyperStar Promo Video Features The HyperStar 9.25 lens...

Once installed (see instructions at bottom), the actions appear in the Actions palette in Photoshop and a selected action may be “played” by simply...

Purchase additional filter holders to easily use multiple filters with the Starizona Filter Slider. Holds standard 2" mounted filters with 48mm thr...

35.3mm T-to-T spacer (M42 female to M42 male).  This adapter takes up 35.3mm of the Starizona SCT Corrector's 90.3mm back focus. Leaving 55mm of ba...

Our solution was to make a level that fits onto a convenient surface on the mount and converts that angled surface into a horizontal one. The AVX L...

This bracket is designed to work with C8, C9, C11 and C14 the Celestron SCT scopes. You can directly connect it to the scopes without using the fe...

  ASI120MINI Camera Sensor The ASI120MM Mini camera integrates the AR0130CS 1/3″ sensor (4.8 mm x 3.6 mm). It is a new model in the “mini”-se...

Our 3D printed EvoGuide 50 Clamshell is designed to make it easy to mount the SkyWatcher EvoGuide 50 refractor and a guidescope for wide-field imag...

The Starizona RASA 8 Filter Holder allows you to use 2" filters with the Celestron RASA 8" telescope with cameras that are not compatible with a F...

Starizona's SCT Corrector has been an incredibly popular focal reducer and coma corrector, giving astrophotographers with standard Schmidt-Cassegr...

Together with the highly transparent in main nebula emission lines at OIII(496nm and 500nm), H-beta (486nm), NII(654nm and 658nm), H-alpha(656nm) a...

This bracket will fit the existing finderscope mounting holes on SCT telescopes.  It fits common finderscope style feet, so you can mount a finders...

This machined aluminum bracket is designed to allow mounting of the ZWO EAF focus motor to the SkyWatcher Esprit line of refractors.  Mounting hard...

This lightweight guide scope is compatible with all ASI cameras Specs: Lens Diameter: 30 mm Focal Length: 120 mm Weight (include guider ring and d...

Works with ZWO Cameras and ZWO ASIair Works on Celestron Mounts and Products 10ft long cord 2.1x5.5 Male Connector Center positive

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It is zero profile, adding no extra height to the 1.25"...

This Filter Blank for the Starizona Filter Slider fits into a holder just like a filter but is solid to provide a "shutter" for taking dark frames ...

PE200 PE160

This T-adapter from Starizona provides the same backfocus distance as the standard T-adapter from Celestron (#93646), but also offers 48mm (2") fil...

The IDAS NBZ-II is a dual band nebula booster filter - the successor to the NBZ (UHS) filter. The FWHM of the NBZ-II is 8nm (+/=0.4nm) at ...

This is the handiest device ever invented for telescopes. The Telrad works like the heads-up display in a fighter jet, appearing to project a red b...

Focus mask for Sky-Watcher Evoguide 50 APO Refractor.

It has a cylindrical recess to accept the mounting post on the bottom of the EQ6R-Pro mount head. An included bolt is used to secure the mount to t...

Dr. David H. Levy Talks about Hyperstar How to Install Your Hyperstar HyperStar Promo Video Specifications Focal Ratio: f/2 Focal...

SOLAR SAFE TELESCOPE FILTER: Filter conforms to the ISO 12312-2:2015(E) international safety standard for filters directly viewing the Sun. The ...

Starizona's variable M42 T-Thread adapters available in three sizes.     Available Sizes: 15mm - 20mm 20mm - 30mm 30mm - 45mm

Celestron is pleased to announce the new NexStar SE Telescope Series! In the tradition of Celestron's famous orange optical tubes, the new NexStar ...

Starizona's 3D Printed SeeStar Solar Finder. Helps you find the sun! Used in conjunction with the SeeStar Solar filter. Simply place the Solar Find...