Filter Slider Accessories

Holds standard 2" mounted filters with 48mm threads. See optional adapters above for step-down rings to 1.25", 36mm or 31mm filters.Note: One filte...

Most filter wheels are too large to use with HyperStar because they block so much of the telescope aperture. Our new Filter Slider allows for easy ...

This 3D-printed case is made to hold the filter drawer from our Filter Slider. The drawer with filter installed fits into the case for protection a...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It is zero profile, adding no extra height to the 1.25"...

This Filter Blank for the Starizona Filter Slider fits into a holder just like a filter but is solid to provide a "shutter" for taking dark frames ...

The filter drawers can be pulled in and out using a small knob. This knob is required because the filter slider will be completely flush with your ...

Purchase additional filter holders to easily use multiple filters with the Starizona Filter Slider. Holds standard 2" mounted filters with 48mm thr...

By removing the original faceplate or tip-tilt adapter on the RedCat you can thread this adapter directly to the scope giving you the correct threa...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It steps the M48 threads of a standard 2" filter down t...

This adapter adds 4.2mm to your Starizona Filter Slider making it 21.7mm in total length, compensating for the .7mm that a standard Filter adds to ...

This top plate with male M54 x 0.75 threads replaces the standard M42 x 0.75 T-thread top on the Starizona Filter Slider. The tops are easily swapp...

This top plate with male M48 x 0.75 threads replaces the standard M42 x 0.75 T-thread top on the Starizona Filter Slider. The tops are easily swapp...

This top plate with male M42 threads replaces the top on the Starizona Filter Slider if you ordered a Filter Slider with a non-standard top. The to...

This top with female M42 threads can be used to convert a standard Starizona Filter Slider into the version for the Celestron RASA 8. To attach the...

20mm adapter that connects Starizona's Filter Slider to an M42 thread. The adapter has female M42 threads on the telescope side and male Filter Sli...

This 1mm thick adapter is used to attach a Starizona Filter Slider to a Celestron RASA 8 telescope. The Filter Slider also requires a female M42 to...

This filter step ring is made specifically with the Starizona Filter Slider system in mind. It steps the M48 threads of a standard 2" filter down t...

Use this adapter to put a 2" male nosepiece onto the Starizona Filter Slider to use on anything that accepts a 2" barrel.   Specifications Male M4...

This 1mm thick adapter is used to attach a Starizona Filter Slider to adapters that need a female M42. 

This top plate with male C-Mount threads replaces the standard M42 x 0.75 T-thread top on the Starizona Filter Slider. The tops are easily swapped ...