Products

This is the top half of the Celestron 11" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Inc...

Note that this version of the counterweight set will not work with the CPC-800 telescopeTo achieve true dynamic balance with a fork-mounted SCT, bo...

This version of the Counterweight Set will not work with the CPC-800. For the correct version, click here.Accurate balance is necessary for the bes...

This is the top half of the Celestron 8" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Incl...

Note that this version of the counterweight set will not work with the CPC-925 telescopeTo achieve true dynamic balance with a fork-mounted SCT, bo...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...

This is the top half of the Celestron 9.25" SCT counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. I...

This version of the Counterweight Set will only work with the CPC-1100. For other Celestron 11" SCTs, click here. Accurate balance is necessary for...

This is the top half of the Celestron CPC-1100 counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. In...

This version of the Counterweight Set will only work with the CPC-800. For other Celestron 8" SCTs, click here.Accurate balance is necessary for th...

This is the top half of the Celestron CPC-925 counterweight set. Use this if you already have a bottom slidebar kit from Celestron or Losmandy. Inc...

Accurate balance is necessary for the best telescope performance. Adding heavy accessories such as 2" eyepieces or cameras to a scope requires the ...

To achieve true dynamic balance with a fork-mounted SCT, both top and bottom weights are required. See stock number CWCPC11-CS for the complete top...

To achieve true dynamic balance with a fork-mounted SCT, both top and bottom weights are required. See stock number CWCPC8-CS for the complete top ...

To achieve true dynamic balance with a fork-mounted SCT, both top and bottom weights are required. See stock number CWCPC925-CS for the complete to...

11" diffraction limited Schmidt-Cassegrain telescope Celestron's premium StarBright XLT coatings Fully computerized dual fork arm Altazimuth mount...

8" diffraction limited Schmidt-Cassegrain telescope Celestron's premium StarBright XLT coatings Fully computerized dual fork arm Altazimuth mount ...

9.25" diffraction limited Schmidt-Cassegrain telescope Celestron's premium StarBright XLT coatings Fully computerized dual fork arm Altazimuth mou...

The wait is over! Celestron's award-winning EdgeHD optical system is now available on a newly designed top-of-the-line dual fork arm computerized m...

Looking to permanently mount your CPC telescope? You'll want this adapter kit to easily attach the CPC fork mount to a permanent pier. The top plat...

Massive 77-pound payload capacity supports large OTAs plus guiders, filters, cameras, and more  Observatory class equatorial GoTo mount with buil...

Massive 77-pound payload capacity supports large OTAs plus guiders, filters, cameras, and more  Observatory class equatorial GoTo mount with buil...

The narrow-bandpass OIII filter improves the view of emission and planetary nebulae. The filter works by blocking natural and artificial light poll...

DC11 Celestron dovetail plate for 11", bolts to existing holes. Wt. 2.25 lbs. Length 19" HS 16.0/16.50, Ht. top of tube to top of dovetail bar 1.00...

This new, All-In-One design marries high quality components of a telecentric barlow, adapters, snouts and Daystar hydrogen alpha filter into one s...

Celestron dovetail plate for 8", bolts to existing holes.Wt. 2 lbs. Length 13.5" HS 12.325/12.70, Ht. top of tube to top of dovetail bar 1.00" Thic...

Celestron dovetail plate for 9.25", bolts to existing holes. Wt. 3.5 lbs. Length 18.925" HS 17.25, Ht. top of tube to top of dovetail bar 1.20" Thi...

  USB-powered handheld digital microscope. Built-in 2MP digital camera for capturing images and videos. Wide range of magnification for a wide ran...

Heater ring provides the most efficient heating directly to the corrector lens to prevent the formation of dew Permanently mounts to your existin...

Enjoy better views through your telescope with this premium diagonal featuring diffraction-limited optics and dielectric coatings Provides a 90° ...

Male to male dovetail plate. For use of secondary equipment on equatorial mount and DSBS. Wt. 1.75 lbs., Length 13.5", Thickness 0.75"

Male to male dovetail plate. For use of secondary equipment on equatorial mount and DSBS. Wt. 1.75 lbs., Length 13.5", Thickness 0.75"

Male to male dovetail plate - short. For use of secondary equipment on equatorial mount and DSBS. Wt. 13 oz., Length 7", Thickness 0.75"

This dovetail bar kit allows you to replace the wider CGE dovetail bar found on most Celestron 11” Schmidt-Cassegrain and 11” EdgeHD optical tubes ...

This dovetail bar kit allows you to replace the wider CGE dovetail bar found on most Celestron 8” Schmidt-Cassegrain and 8” EdgeHD optical tubes wi...

Use this sturdy, 3D-printed plastic bracket to attach a standard red-dot type finderscope to the flash hot shoe on top of your Canon DSLR. The find...

Use this sturdy, 3D-printed plastic bracket to attach a standard red-dot type finderscope to the flash hot shoe on top of your Nikon DSLR. The find...

Use this dual finder bracket to mount multiple items to a single finder shoe.  Perfect for a small guidescope like the ZWO Mini 30mm along side a Z...

Universal dovetail plate for use on Tele Vue, Parks, Takahashi, Questar, Vixen, Meade refractors, etc.Wt. 2.4 lbs., Length 14", thickness 0.5", one...

ADM Universal Dovetail Plate - 11" Long The ADM DUP11 is an 11" long Universal Dovetail Plate for Losmandy style (D-series) saddle plates. It ...

Universal dovetail plate for use on Tele Vue, Parks, Takahashi, Questar, Vixen, Meade refractors, etc. Wt. 2.4 lbs., Length 14", thickness 0.5", on...

Universal Dovetail Plate 19 inch-Hole separations of: 3.5", 60mm, 2", 1.5", 35mm, 1.25",Fits: Meade 8, Celestron 8, Meade 7, Celestron 9.25, Meade ...

Universal Dovetail Plate 24 inch-Hole separations of:3.5", 60mm, 2", 1.5", 35mm, 1.25",Fits: Meade 8, Celestron 8, Meade 7, Celestron 9.25, Meade 1...

Short Universal dovetail plate for use on Tele Vue, Parks, Takahashi, Questar, Vixen, Meade refractors, etc. Wt. 12 oz., Length 7", thickness 0.5",...

Short Universal dovetail plate for use on Tele Vue, Parks, Takahashi, Questar, Vixen, Meade refractors, etc.Wt. 12 oz., Length 7", thickness 0.5", ...

Dovetail plate adapter. Works with both D and V series plates. Mounts to existing rings or telescopes. For use with dovetail plate. Once mounted, n...

Works with both D and V series plates. One axis, 360 deg. camera rotation, dovetail mounted, no tools needed. Wt. 10.75 oz.Ht. from top of dovetail...

Works with both D and V series plates. Three axis, 360 deg. camera rotation, +/- 45 deg. camera tilt, 360 deg. unit rotation, dovetail mounted, no ...